PART 1 – GENERAL

1.01 RELATED DOCUMENTS

• A. Drawings, conditions of the contract and Division 1 Specifications sections, apply to work of this section.

1.02 SUMMARY

• A. Section Includes: Architectural Fiberglass Reinforced Polyester fabrications.

1.03 RELATED SECTIONS

• A. Section 05120 – Structural Steel: Support framing for architectural fiberglass fabrications.
• B. Section 06100 – Rough Carpentry: Framing of Opening and Blocking.
• C. Section 07900 – Joint sealants and field applied sealants.

1.04 DESIGN REQUIREMENTS

• A. Installed architectural fiberglass fabrications and fastening systems shall be designed, engineered, fabricated, and installed to conform to the state codes, local codes, and the Architect’s design.

1.05 SUBMITTALS

• A. Shop Drawings: Shall illustrate dimensions, adjacent construction, materials, thickness, fabrications details, required clearances, field jointing, tolerances, colors, finishes, methods of support, attachments, anchorage to substrates, integration of components, and list of part numbers that coordinate with labeled architectural fiberglass parts.
• B. Submit manufacturer’s current valid certification with The Certified Composites Technician (CCT) program created by the American Composites Manufacturers Association (ACMA).
• C. Submit manufacturer’s internal Quality Control & Assurance Procedures based upon provisions published in the “Guidelines and Recommended Practices for Fiberglass Reinforced Plastic Architectural Products” upon request.
• D. Product Data: Submit manufacturer’s product data and installation instructions.
• E. Product Samples: Submit minimum 3-inch x 5-inch samples in specified color, texture and finish when applicable.

Pages: 1 2 3 4 5